Install new behar pools

After the installation by quattor, a few more things need to be done in order to finalise the configuration and be ready to have them ready in dCache

create the raid 5 pools mounts

On all the previously installed machines, there is a little script called make_xfs.sh
This script needs to be adapted to reflect the current topology of the new behar. It will then make the raid pools and add the configuration to fstab.

make the dcache pools ready

In order to do this, the following command needs to be issued for each pool residing on the machine:

dcache pool create  /storage/6/pool behar094_6 behar094Domain

This line will also add additional lines at the end of the dcache layout file (/etc/dcache/layouts/pool.conf)
These lines need to be removed manually or via the execution of ncm metaconfig.

Install certificate on the machines

Generation and installation of certificates is explained in this page: http://doc.iihe.ac.be/wiki/t2b/index.php/UpdateCertificates